@abiz wrote:
Is it possible to create a fillable form with a button that submits via http then saves to server without prompting? What type of bandwith are we talking about, what do I need on my end? Do you have a bundle with both products for Business? I see a shopping cart for one but not the other product.
TIA
Posts: 1
Participants: 1
@Scott_Kinkade wrote:
Okay, so I'm trying to save my book's jacket as a pdf in the printer, but it keeps saving it as Letter and I can't find the right size. I'm trying to create a pdf that's exactly 12.403 x 8.973. I tried using an online resizer, but it just adds white borders and doesn't scale it up. Please help.
Posts: 1
Participants: 1
@jq.gplains wrote:
I have had an end user come to me this morning with a PDF document that isn't opening. It turns out the document is a SmartForm created with Adobe LiveCycle Designer ES9.0. It is able to be opened by the latest release of Adobe Acrobat Reader DC however when attempting to open with PDF Architect I am greeted with;
"Please wait...
If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document ...."
Does PDF Architect even support the use of eForms/SmartForms?
Help much appreciated otherwise we will need to roll over to Adobe Acrobat again which is not ideal when we have started licensing users for PDF Architect Pro
Cheers
Posts: 2
Participants: 2
@EvoWing wrote:
Adding a character in a block of text slightly increases spacing for next line so making the text block disjointed.
Even deleting a single character and then typing same character back in increases line spacing. However inserting same character by undoing deletion does not affect line spacing.This is a common edit I do in PDFA V4 to update page number references without problem.
Excess line space is not acceptable in V7.Problem did not occur in version 4 (or at least I thought it was V4, but about box says V1.2.97.14551)
I'm unable to us V7 until this is fixed.
Anybody any ideas?
Posts: 1
Participants: 1
@abdan wrote:
How to remove all text of the same pattern in a pdf document by ghostscript, or PDFarchitec, or qpdf ?
Posts: 1
Participants: 1
@Gaz50 wrote:
I have purchased the Pro version of PDF Architect and I can not insert pages in to new or existing documents. I get the prompt to download the insert module but, when I click on the Yes button to download and install the module, nothing happens. Please help.
I wonder how many other modules are not installed. There used to be a Modules menu option where one could view the modules and their status.
Posts: 2
Participants: 2
@An_Dre wrote:
Just ■■■, left side is adobe, right side pdf architect. as you can see most of the important infomation is missing...thats it, im done with your useless pathetic software...
Posts: 1
Participants: 1
@Studiotwee wrote:
Hi,
We have one PDF Architect Professional licence, Yearly plan, renews 10/22/2019. I use it on my desktop, but the tools I used before are no longer available!? How is this possible.
I also use this licence on mij Laptop, this should be possible because it may be used on 3 systems. But even when I disconnect this laptop, out of the assigned licences list it does still not work on the desktop.
Who can help me!?
With kind regards, Frans
Posts: 2
Participants: 2
@GLP wrote:
Hi,
I have PDF Architect 7 installed on multiple PCs and they are all exhibiting the same problem. If we open a PDF in Architect, then close it (either just the PDF or the entire architect program) the PC thinks the file is still opened. This prevents me from saving overtop the same PDF.
For example. I have a Word document I PDF. After creating the PDF it opens in Architect. I notice an error. Close architect and go back to Word to edit the document. Try to save the document again as a PDF and it won't let me. I get a windows notice that the file is still open. But architect is closed.
When I go into task manager I see there are still live PDF Architect background processes. Unless I kill them off I can't edit the PDF again. This is very annoying, problematic, and time consuming behavior. Please help.
regards,
Gary
Posts: 2
Participants: 2
@AkersM wrote:
I print 100 to 200 a pdfs a day and when I try to quick print the documents with in Outlook it opens the PDF file first then I have to print it from with in the application Architecture 7.0. Yet if I use Adobe reader (Not that I want to) I can just click quick print and it prints. This is inside Outlook 2016 as all these PDF's are emailed to me.
Is there a way to allow me not to open a PDF document but just print it?
Ta
AkersM
Posts: 1
Participants: 1
@CedricG wrote:
Hi,
Please Help me to congure defaut printing on pdf architect5 in duplex (dual-side) mode.
Thx for your help.
Regards.
Posts: 1
Participants: 1
@mousehouse wrote:
I have PDF Architect 7 (7.0.23.3163 64-bit) on Windows 10. Since I updated a couple of weeks ago I can highlight text but when I go to print the highlight does not show. I've tried rebooting, shutting down PDF Architect does not help. The only way I can print the highlight is to use Acrobat Reader. Any help would be greatly appreciated.
Posts: 2
Participants: 2
@RF_PDF wrote:
Is there anyway to extract and delete pdf pages in a single operation? When processing large pdf files we carve up the file by extracting and deleting pages into various directories until the file is whittled down.
It would be great if there was a check box to extract and immediately delete pages from a pdf file (fox it phantom .pdf does this) I really like the PDF Architect interface and would like to switch to it, but without an efficient way to do this, it will make it difficult. Is there a way?
How do you request an enhancement?
Posts: 1
Participants: 1
@patka wrote:
Beim Druckdialog vom PDF Architekt gibt es die Auswahl "Druckereigenschaften", dann öffnet sich der Original Druckertreiber. Im Druckertreiber kann man dann Papierformat, Ausrichtung Hoch, Quer, Papierränder und alles mögliche einstellen.
Gleichzeitig kann ich diese Dinge auch teilweise im Druckdialog einstellen.Welche der Einstellungen haben denn Vorrang ? Oder wie ist das geregelt ?
Posts: 1
Participants: 1
@dt67 wrote:
Followed instructions, but the mouse icon never changes and I can't select any text.
Posts: 1
Participants: 1
@patka wrote:
Hallo, ich möchte Zeichnungen über PDF Architekt mehrfach auf den Plotter schicken.
Dieser hat eine Verschachtelungsfunktion, damit die Plots schön angeordnet werden.
Leider scheint er es nicht zu erkennen, dass er verschachteln soll, wenn ich bei Kopien mehrere Kopien, z.B. 3 eingebe. Druckt es immer auf separate Seiten, hintereinander.
Nur wenn ich mehrfach auf Drucken gehe, scheint er dies zu kennen.
Was kann ich dagegen tun ?
Posts: 1
Participants: 1
@shiuser wrote:
I have a scanned PDF of about 16 MB that I want to removed over 75% of it. I've tried image/clip, image/crop, and edit/crop and the appropriate area is left but the overall new filesize is still 16 MB. Is it really removing the areas or just turning them to the background color?
Posts: 2
Participants: 2
@dbird wrote:
When I subscribed to PDF Architect Pro w OCR, I thought it was version 7. But when I look at my list of my products in my account, it doesn't say what is the version. Also, when I subscribed, as I recall, it said that upgrades were included.
My issue is that today I received an email offer to upgrade to version 7. So, I go to look to see what's going on, and I can't find anywhere that my installed product says it's version, so I can check.
Bottom line question: How do I get my included upgrade? And, how to I check to see if I already have it?
Posts: 4
Participants: 2
@Mogie wrote:
When viewing onscreen, resolution is very poor. Is there any way to improve this?
Many thanks.
Posts: 1
Participants: 1
@gysmol wrote:
Guten Morgen Zusammen,
vllt bin ich ja einfach nur Blind, aber ich leider finde ich keine Informationen zur genauen Lizenzierung.
Wir hätte Interesse am Architekt für 10 User, jedoch arbeiten wir auf einer Terminalserverfarm aus 5 Servern.Wie genau ist hier die Lizenzierung? Gibt es Terminalserver-Lizenzen je Server? (keine gesehen)
Oder muss ich am ende jeden User auf jeden Terminalserver lizenzieren?Vielen Dank
gysmol
Posts: 1
Participants: 1
